Earlier I had planted Anemone Corms white and purple. Most of them are flowering now. ( wish I had put in 100s. )
I have scattered packets of seed and planted out a punnet of Nemiesia and more arctotis. I have pushed in some cuttings as well. It is all still looking a little bare but I hope the plants will spread and the seeds will come up in the spaces.
*****
Elsewhere in the garden my Rata bush ( Metrosideros carminea ) is just out. I like it best before any of the flowers have had time to fall.( It is a relation of the NZ pohutukawa )
Close up of flowers.******
New Lawn.
A sloping area beside the main vegetable garden that leads up to the service area ( with compost bins, incinerator and garden shed ) has been a problem for a while. It got kikuya and weeds ( undesirable ). We had had 2 tries at getting it established in proper lawn neither worked very well so this time R put in a new wooden edging ( cost NZ $150 ) and levelled the soil ( 3 cubic metres needed cost NZ $135 ). We thought we might lay ready lawn but the quote was for NZ $1100 - WHAT?
So we got some quotes for hydroseeding it . Lawn Tech turned up very promptly - almost before we were ready ( 1 hour to spare ) - (but before the last load of top soil got time for birds to drop any weed seeds on it )
This is the process - you may have seen them using it on slopes at new road works to stop the cuttings slipping ).
Paul the owner operator mixing the seed into the tank with the slurry. ( it is made of recycled paper like phone books and something like wallpaper glue )
R is holding a board so it goes in the right place. The seed mix is then hosed on under slight pressure. It looks like concrete but isn't. It has to be watered every day till it gets established. The finished area. Cost NZ $115. ( we had done the preparation well so he could just walk in an spray it straight on which was a big saving. ) Certainly less expensive then ready lawn. I will show a photo when it starts to grow which should be in 10 to 14 days.
If you are establishing new lawn the Lawn Tech web site has good care and establishment tips.
4 comments:
What an interesting idea - almost instant lawn! Must investigate that further.
lovely garden pics. One day I'm going to come for a tour. What is the timber edge for the new lawn built with??? Is the timber screwed to pegs? Is that it? I reckon I could do that and it looks so neat and tidy. thanks for the inspiration.
I love reading about your garden. I give a little sigh, and look at my weeds!
Thanks All for your comments.
Pixie you are almost right. The places where the timber( which is H4 treated rough sawn pine 200 X 50mm) has got a fish plate screwed ( stainless steel screws )on either side at every join. The pegs are 2/3rds in the ground.The pegs are nailed to the boards.
R says any timber you have would work as long as it was strong enough and you put in plenty of pegs to hold it where you want it.
Post a Comment